The new BLM regulations on flare gas measurement and waste prevention mark a significant shift towards more sustainable and efficient oil and gas production practices.

The NOG Energy Week 2025, held from 29 June to 3 July at the ICC in Abuja, Nigeria, is one of the key events for the Nigerian energy sector. The conference and exhibition brings together over 7,000 participants, 800 delegates and 350 exhibitors to discuss the future of energy in Nigeria. Highlights included strategic and […]

PetroAfrica is a premier conference and exhibition for the oil and gas industry in Africa. Held annually, it brings together professionals from the upstream, downstream, and midstream sectors to discuss and address key industry challenges. The event features over 300 exhibitors, 30 conferences, and attracts around 20,000 professionals. It includes thought-provoking sessions, workshops, and networking […]

May 27, 2024 — Cambridge, UK – Fluenta, a global leader in developing ultrasonic sensing technology to measure flare gas, has recently partnered with SEGITEC, an integrator of control and instrumentation solutions with strong roots in North Africa, to become its exclusive channel partner.  Fluenta’s ultrasonic flare gas measurement solutions and SEGITEC’s established distribution network […]

This article describes and compares ultrasonic and thermal mass technologies used for flare gas measurement and highlights the advantages and disadvantages of each. For ultrasonic measurement, this article refers to Fluenta’s FGM 160 flare gas meter. Measurement Methods An ultrasonic flow meter sends ultrasonic signals across a pipe at a 45° angle to the direction […]

In 2020, Malaysia’s government-owned oil and gas company, Petronas, stated their aspirations to achieve net zero emissions by 2050 with the application of new technologies to reduce emissions. This included a focus on reducing and ultimately eliminating routine flaring. To reduce flare gas volumes, the first step Petronas took was to ensure accurate and reliable […]

Where would you start if you’ve been tasked with specifying a flare gas measurement solution? Unlike acquiring a new boiler for your home, correctly specifying a flare gas meter requires a thorough process to identify an installation’s needs and requirements before engaging with a vendor. We have seen many operators get this step wrong and […]

The FlarePhase Cryo is optimized to handle difficult gas compositions including high methane concentrations.

The ability to measure gas flows at cryogenic temperatures for extended periods of time while maintaining accuracy levels makes this ideal for the LNG and gas liquefaction industries.

In 2020, Malaysia’s government-owned oil and gas company, Petronas, stated their aspirations to achieve net zero emissions by 2050 with the application of new technologies to reduce emissions. This included a focus on reducing and ultimately eliminating routine flaring. To reduce flare gas volumes, the first step Petronas took was to ensure accurate and reliable […]

Some clients are located in extremely cold regions or have cryogenic process conditions which make accurate measurement very difficult as both of these put significant stress on the meters.

The client was suffering due to their exist flare gas meters being unable to cope with the process conditions and malfunctioning and providing inconsistent and incorrect readings.

Indorama Venture’s olefins plant required the installation of two flare gas meters to meet their environmental reporting requirements.

Challenge We were asked to install measurement solutions for a customer in Nigeria in a range of pipes including both a 65” and a 90” flare line, both with potentially high levels of CO2 Solution It’s important to keep the tip-to-tip sensor distance within certain limits because high CO2 would absorb transmitted signal. It’s also […]

Challenge Ultrasonic flow meters require a certain amount of straight piping free from any obstructions such as bends, valves etc. for them to measure the flow accurately. In this case the flare left the knockout drum and went immediately to the underground channel leaving not enough straight piping for a flare meter to be installed. […]

Challenge There was no power source available on-site for the several months as the flare was located in a remote area in Tabasco state, Mexico. However, due to the National Hydrocarbons Commissions (NHC) requirements the client could not bring the flare into operation without a flare meter and they did not want to wait for […]

Challenge: A client in the chemicals industry was currently using thermal mass dispersion meters to measure the amount of waste gases being discharged. They wanted to not only meet the strict regulations set by the national environmental agencies but also operate in line with their policy of exceeding these requirements to future proof their facility […]

Challenge: Some installations possess highly corrosive gases being vented. This can lead to the life of the transducers being reduced significantly which not only costs the clients in terms of time and cost but also in terms of data loss due to the break in measurement which may incur regulatory penalties. Solution When one such […]

Challenge: In this case, there was not enough straight piping available, and modifications were not an option. With no suitable room left to install a flare gas measurement system this client reached out to us for this special project. Solution Using their experience and engineering backgrounds, our dedicated service engineers assessed the situation and found […]

The NOG Energy Week 2025, held from 29 June to 3 July at the ICC in Abuja, Nigeria, is one of the key events for the Nigerian energy sector. The conference and exhibition brings together over 7,000 participants, 800 delegates and 350 exhibitors to discuss the future of energy in Nigeria. Highlights included strategic and […]

PetroAfrica is a premier conference and exhibition for the oil and gas industry in Africa. Held annually, it brings together professionals from the upstream, downstream, and midstream sectors to discuss and address key industry challenges. The event features over 300 exhibitors, 30 conferences, and attracts around 20,000 professionals. It includes thought-provoking sessions, workshops, and networking […]

ADIPEC is the flagship event for the energy industry, bringing together leaders from all disciplines under a single roof. 180,000 attendees and lots of coffee.

It was a pleasure to meet so many customers new, and old, at OGA ’23 in Kuala Lumpur. Our new booth design proved a big hit with attendees.

The new BLM regulations on flare gas measurement and waste prevention mark a significant shift towards more sustainable and efficient oil and gas production practices.

The contract enables Tamimi Energy to manufacture under license Fluenta’s flare gas meter FGM160 in Saudi Arabia.

Bechtel, a renowned Engineering, Procurement, and Construction company, is working with Fluenta to engineer a gas measurement solution for Atlantic, one of the world’s largest Liquified Natural Gas (LNG) producers.   

The contract deal will enable Tatweer Petroleum to improve its efficiency and comply with increasing national and global regulations to measure, monitor, and report flare gas emissions.

Fluenta’s technology provides reliable measurement in extremely high or low-pressure environments, utilizing their market-leading product range in a number of configurations, which results in extremely high levels of accuracy in these challenging conditions.

The new distribution agreement allows Fluenta, a global leader in ultrasonic flare gas measurement technology, to better support Louisiana-based chemical plants and refineries to meet increasingly stringent environmental regulations.

Fluenta is delighted to announce it has appointed Valtronics Inc. as the exclusive distributor for Fluenta’s gas measurement technology across sixteen states in the East of the USA.

The newly launched Fluenta FlareCalTM verification box was recognised as the innovation of the year for its disruptive role as the most rigorous verification method enabling operators across the oil and gas industry to ensure compliance with environmental regulations without the sting of the hefty engineer service and calibration visits.  “Congratulations to international gas flare measurement […]

The Nigerian authorities are leading the charge in the control and regulation of flaring gas, looking towards eliminating the need for routine flaring over the next few years. A key component in that challenge is accurate measurement. Fluenta, the global leader in the use of ultrasonic sensing technology for the measurement of flare gas, has […]

May 27, 2024 — Cambridge, UK – Fluenta, a global leader in developing ultrasonic sensing technology to measure flare gas, has recently partnered with SEGITEC, an integrator of control and instrumentation solutions with strong roots in North Africa, to become its exclusive channel partner.  Fluenta’s ultrasonic flare gas measurement solutions and SEGITEC’s established distribution network […]

The Nigerian authorities are leading the charge in the control and regulation of flaring gas, looking towards eliminating the need for routine flaring over the next few years.

The Nigerian authorities are leading the charge in the control and regulation of flaring gas, looking towards eliminating the need for routine flaring over the next few years.

This article describes and compares ultrasonic and thermal mass technologies used for flare gas measurement and highlights the advantages and disadvantages of each. For ultrasonic measurement, this article refers to Fluenta’s FGM 160 flare gas meter. Measurement Methods An ultrasonic flow meter sends ultrasonic signals across a pipe at a 45° angle to the direction […]

Where would you start if you’ve been tasked with specifying a flare gas measurement solution? Unlike acquiring a new boiler for your home, correctly specifying a flare gas meter requires a thorough process to identify an installation’s needs and requirements before engaging with a vendor. We have seen many operators get this step wrong and […]

Flaring in the oil and gas industry significantly contributes to environmental impact. Accurate flare gas measurement is crucial for managing emissions and supporting decarbonization efforts to reach net-zero targets.