Fluenta’s FlarePhase Cryo technology is specifically designed to operate in extreme low-temperature environments, ranging from -200°C to +250°C

Fluenta’s FlarePhase 350 is designed to operate in extreme temperature environments, ranging from -40°C to +350°C. This broad temperature range makes it ideal for a variety of industrial applications where process conditions exceed 250°C, particularly in industries that rely on extreme thermal processes. Several key applications necessitate the use of FlarePhase 350 due to the […]

Fluenta’s FlarePhase technology is engineered to handle the demanding conditions of flare gas measurement in high carbon dioxide (CO2) environments

Fluenta’s FlarePhase transducers are engineered to function across an exceptionally wide range of process temperatures, from as low as -200°C to as high as +350°C. This capability is key in extreme operational environments, particularly within the oil and gas industry where temperatures can fluctuate dramatically depending on the gas composition and processing conditions. Several innovative […]

Fluenta’s flare gas measurement solutions are highly adaptable and suited for both onshore and offshore oil and gas operations due to their robust design, accuracy, and ability to function in extreme environments.

In today’s oil, gas, and petrochemical industries, ultrasonic flare gas measurement plays a crucial role in both regulatory compliance and operational efficiency.

In 2020, Malaysia’s government-owned oil and gas company, Petronas started installing Fluenta flare gas meters

Some clients are located in extremely cold regions or have cryogenic process conditions which make accurate measurement very difficult as both of these put significant stress on the meters.

The client was suffering due to their exist flare gas meters being unable to cope with the process conditions and malfunctioning and providing inconsistent and incorrect readings.

Indorama Venture’s olefins plant required the installation of two flare gas meters to meet their environmental reporting requirements.

Challenge We were asked to install measurement solutions for a customer in Nigeria in a range of pipes including both a 65” and a 90” flare line, both with potentially high levels of CO2 Solution It’s important to keep the tip-to-tip sensor distance within certain limits because high CO2 would absorb transmitted signal. It’s also […]

Challenge Ultrasonic flow meters require a certain amount of straight piping free from any obstructions such as bends, valves etc. for them to measure the flow accurately. In this case the flare left the knockout drum and went immediately to the underground channel leaving not enough straight piping for a flare meter to be installed. […]

Challenge There was no power source available on-site for the several months as the flare was located in a remote area in Tabasco state, Mexico. However, due to the National Hydrocarbons Commissions (NHC) requirements the client could not bring the flare into operation without a flare meter and they did not want to wait for […]

Challenge: A client in the chemicals industry was currently using thermal mass dispersion meters to measure the amount of waste gases being discharged. They wanted to not only meet the strict regulations set by the national environmental agencies but also operate in line with their policy of exceeding these requirements to future proof their facility […]

Bechtel, a renowned Engineering, Procurement, and Construction company, is working with Fluenta to engineer a gas measurement solution for Atlantic, one of the world’s largest Liquified Natural Gas (LNG) producers.   

At Fluenta, we pride ourselves on our flexible approach to problem-solving, delivering innovative solutions that exceed client expectations, no matter how challenging the problem

Challenge: In this case, there was not enough straight piping available, and modifications were not an option. With no suitable room left to install a flare gas measurement system this client reached out to us for this special project. Solution Using their experience and engineering backgrounds, our dedicated service engineers assessed the situation and found […]

The NOG Energy Week 2025, held in Abuja, Nigeria, is one of the key events for the Nigerian energy sector.

PetroAfrica is a premier conference and exhibition for the oil and gas industry in Africa.

ADIPEC is the flagship event for the energy industry

It was a pleasure to meet so many customers new, and old, at OGA in Kuala Lumpur. Our new booth design proved a big hit with attendees.

Methane emissions from the energy sector are increasingly under the spotlight. Recent satellite imagery from MethaneSAT and CarbonMapper reveals that emissions are higher than previously reported, largely due to inefficiencies in flaring and unaccounted leaks across the value chain. While regulatory frameworks exist to minimise the environmental impact of flare gas, they are not enough […]

The new BLM regulations on flare gas measurement and waste prevention mark a significant shift towards more sustainable and efficient oil and gas production practices.

The contract enables Tamimi Energy to manufacture under license Fluenta’s flare gas meter FGM160 in Saudi Arabia.

The contract deal will enable Tatweer Petroleum to improve its efficiency and comply with increasing national and global regulations to measure, monitor, and report flare gas emissions.

Fluenta’s technology provides reliable measurement in extremely high or low-pressure environments, utilizing their market-leading product range in a number of configurations, which results in extremely high levels of accuracy in these challenging conditions.

The new distribution agreement with Trilogy supports Louisiana-based chemical plants and refineries to meet increasingly stringent environmental regulations.

Fluenta is delighted to announce it has appointed Valtronics Inc. as the exclusive distributor for Fluenta’s gas measurement technology across sixteen states in the East of the USA.

Fluenta, is the winner of the Outstanding Innovation category at the 2022 Global Business Excellence Awards.

Fluenta empowers Africa’s largest oil refinery with cutting-edge flare gas measurement technology

May 27, 2024 — Cambridge, UK – Fluenta, a global leader in developing ultrasonic sensing technology to measure flare gas, has recently partnered with SEGITEC, an integrator of control and instrumentation solutions with strong roots in North Africa, to become its exclusive channel partner.  Fluenta’s ultrasonic flare gas measurement solutions and SEGITEC’s established distribution network […]

Fluenta empowers Africa’s largest oil refinery, Dangote, with cutting-edge flare gas measurement technology

The Nigerian authorities are leading the charge in the control and regulation of flaring gas, looking towards eliminating the need for routine flaring over the next few years.

Methane emissions from the energy sector are increasingly under the spotlight. Recent satellite imagery from MethaneSAT and CarbonMapper reveals that emissions are higher than previously reported, largely due to inefficiencies in flaring and unaccounted leaks across the value chain. While regulatory frameworks exist to minimise the environmental impact of flare gas, they are not enough […]

This article describes and compares ultrasonic and thermal mass technologies used for flare gas measurement and highlights the advantages and disadvantages of each. For ultrasonic measurement, this article refers to Fluenta’s FGM 160 flare gas meter. Measurement Methods An ultrasonic flow meter sends ultrasonic signals across a pipe at a 45° angle to the direction […]

Specifying a flare gas meter requires a thorough process to identify an installation’s needs and requirements.

Flaring in the oil and gas industry significantly contributes to environmental impact. Accurate flare gas measurement is crucial for managing emissions and supporting decarbonization efforts to reach net-zero targets.